Product Function Description
6
1.Standby: After power-on, the whole function is brightened for 1-2 seconds (a
long sound prompt), then only real-time temperature is displayed. After 5 minutes
of standby state, screen hologram (not counting the holding time) requires 0.5W
power consumption.
。
How to use
Product Menu
For the first time to use or no use for a long time, it is recommended that you
fill to the maximum level mark with fresh tap water, boil and empty the kettle
at least 2 times to clear kettle of any tiny particles. Do not drink such water.
1. Press the lid lock on the handle, and you can open it.
2. Remove the kettle from the base to the filling place. Fill the kettle with
desired amount (no less than the minimum and no more than the maxi-
mum.) Put back the lid; place the kettle back on the base unit.
3. Connect the plug into a power outlet (220-240V, AC), switch the kettle on
by pressing the switch. The light will illuminate to indicate the kettle is
heating.
4. The kettle will automatically switch off once the water has boiled and the
neon light goes off.
5. Lift the kettle from the base, and you can pour out the water into contain-
er.
Menu
START/CANCEL
(note: # 1 is Menu and # 2 is START/CANCEL)
