Service Manual_2018-V1.0
24
2
)
Pull out the thermostat fix plate and knob, remove the
wiring and thermostat from the thermostat box.
8.7 Compressor case
Rear cover and compressor case
1
)
Remove by cross screwdriver the screws fixing back
cover plate of compressor chamber anticlockwise.
2
)
Take the back cover plate of compressor chamber
upward.
Compressor and the cooling system pipe
1
)
Cut off the power, remove the goods in the refrigerator,
with the tape to make the door fixed firmly and prevent
the door dropping when the refrigerator dumping.