![background image](http://html1.mh-extra.com/html/midea/22033010000701/22033010000701_service-manual_1791279021.webp)
ServiceManual_2018-V1.0
21
8. Dismantling of parts
8.1 Parts on the door
Door seal
Door seal is installed into door liner groove.
1) Open the wine door
;
2) Take the door seal
①
out of door liner
;
Door stopper
The door lamp switch stopper is installed in the lower part of
the door. Take down the door, loosen the screws on the stopper
and take it down.
rollover beam
rollover beam
None
8.2 Parts inside the refrigerator
Glass shelf
1
)
1) Lift up the Steel wire wine rack with a proper force and
pull it out towards yourself.
Air duct mask.
Summary of Contents for 22033010000701
