Astra Peel-a-ton KA-720 Operation Manual Download

Page: 1 / 24

Contents

1. Introduction

････････････････････････････････

P.1

2. Safety Precautions

･････････････････････････

P.1

3. Speciﬁ cations

･･････････････････････････････

P.4

4. Names and Functions of Parts

････････････････

P.5

5. Correct Use of the KA-750

････････････････････

P.7

6. How to Operate the KA-750

･･･････････････････

P.9

7. How to Remove and Attach Parts

･････････････

P.11

8. Cleaning and Maintenance

･･････････････････

P.16

9. Settings

･･･････････････････････････････････

P.18

10. Troubleshooting

････････････････････････････

P.20

11. In Conclusion

･･････････････････････････････

P.23

For large fruits and vegetables

Fast, clean removal of peels

Electric Peeler

KA-720/730/750

Peel-a-ton

Operation Manual

Remarks

●Thank you very much for purchasing KA-720/730/750.
●To ensure safe and correct operation of this unit, please read and understand the contents of

this manual before use.

●After reading this manual, keep it in a safe and accessible place for other users of the unit.
●In order to improve the performance of this product, the speciﬁ cations of the product may be

modiﬁ ed without prior notiﬁ cation.

AAM-K75-01 Rev.2007-EN

Manual Videos

Summary of Contents for Peel-a-ton KA-720

























Search results

Summary of Contents for Peel-a-ton KA-720

Reviews:

Related manuals for Peel-a-ton KA-720

Brands by name

Popular brands

Astra Peel-a-ton KA-720, Operation Manual

Search results

Summary of Contents for Peel-a-ton KA-720

Reviews:

Related manuals for Peel-a-ton KA-720

Brands by name

Popular brands