Midea 22033010000701, Service Manual

Page: 25 / 52

ServiceManual_2018-V1.0
25
Before remove the sensor, the refrigerating duct
assembly should be removed
1
）
Remove the air duct
assembly from the refrigerating.
2
）
Remove the sponge tape on the surface and remove
the sensor.
The sensor position is on the back of the duct cover.
Ambient temperature sensor None
Sensor in Variable temperature chamber None
Thermostat
Thermostat None
8.6 Compressor case
Rear cover and compressor case
1
）
Remove by cross screwdriver the screws fixing back
cover plate of compressor chamber anticlockwise
2
）
Take the back cover plate of compressor chamber .
Terminal box of the compressor
Remove the screws Two screws outsideOne screw inside
None
Compressor and the cooling system pipe