Midea 22031020000113, Service Manual

Page: 30 / 45

Service Manual , 2016-12
30 / 45
Disassembly and installation of ice maker
1) Unplug the refrigerator from the wall outlet.
2) Remove the freezer shelf and ice tray rack from
the freezer.
3) Remove the plug from the inside of the freezer
compartment with a putty knife.
4) Peel off the label covering the ice maker hole on
the back of the refrigerator, then remove the foam
from the hole with the needle nose pliers. Retain
the foam for future use.
5) Push the water inlettube into zhe small hole on
back of refrigerator.Rotate while inserting the
tube until the flat surface of inlettube is tight
against the back of the refrigerator.