Midea 190RDN3-E, Installation And Owner'S Manual

Page: 12 / 20

9
Installation & Owner‘s Manual
6. OPERATION
6.1 Control Panel Explanation
6.2 Display Explanation
Fig. 6-1
Display
Operation
Fig.6-2
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
10
11
12
13 14 16 15 17 18 19
11
10
12
13
⑤
⑥
⑦
⑨
⑧
WATER TEMP
：
will be displayed all the time.
shows water temperature on normal time;
shows setting temperature when setting
temperature;
shows unit setting/running parameters,
error/protection code under query mode.
No Icon Description
DISINFECTION:
will be displayed when the unit is in
disinfection mode, otherwise will be
extinguished.
LOCK:
will be displayed if buttons are locked,
otherwise will be extinguished.
ECONOMY MODE:
will be displayed if unit is operating
in Economy Mode. When selecting mode,
will flash with 1Hz frequency if
Economy Mode is selected at the off time.
HYBRID MODE:
will be displayed if unit is operating
in Hybrid Mode. When selecting mode,
will flash with 1Hz frequency if
Hybrid Mode is selected at the off time.
E-HEATER MODE:
will be displayed if unit is operating
in E-heater Mode. When selecting mode,
will flash with 1Hz frequency if
E-heater Mode is selected at the off time.
ALARM:
When unit is displaying protection/error,
will flash with 5Hz frequency as well as
buzzer sounding 3 times every minute until
protection/error eliminated or press for 1
second.
HIGH TEMP:
If target water temp. is higher than 50
℃
,
will be lightened , otherwise will be
extinguished.
FILL WATER:
will be displayed and flash with 1Hz
frequency when the unit is re-powered on if
the unit was off at last time of power on,
then if press once, will be displayed
without flashing,then press again, will
be extinguished all the time . will not be
displayed when the unit is re-powered on if
the unit was on at last time of power on.
TEMP-UNIT
：
will be displayed if displays temperature,
otherwise will be extinguished.
Table 6-1
①
②
③
AMBIENT TEMP OUTSIDE THE OPERATIONAL
RANGE OF HP:
will be displayed if the ambient temp. is
not in the operating range of the heat pump,
otherwise will be extinguished.
④
WIRE CONTROLLER (Reserved function):
will be displayed if connected to a wire
controller, otherwise will be extinguished.
COMPRESSOR:
will be displayed if compressor is activated,
otherwise will be extinguished.
No Icon Description
E-HEATER:
will be displayed if e-heater is activated,
otherwise will be extinguished.
14