![background image](http://html1.mh-extra.com/html/midea/1834g1f-bs/1834g1f-bs_instruction-manual_1791308012.webp)
11
COUNTERTOP INSTALLATION
Remove all packing material and accessories.
Examine the oven for any damage such as dents or broken door.
Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven
cabinet surface.
Installation
1. Select a level surface that provide
enough open space for the intake
and/or outlet vents (Figure 1).
A 10-cm spacing should be kept
between the appliance and right
and back walls, and a 30-cm
spacing kept on the top.
Never dismantle the applicance's
feet, nor block the air intake and
exhaust opening.
The left side must be open.
Blocking the intake and/or
outlet openings can damage
the oven.
Place the oven as far away
from radios and TV as possible.
Operation of microwave oven
may cause interference to your
radio or TV reception.
Plug your oven into a standard
outlet. Be sure the voltage and
the frequency is the same as
the voltage and the frequency
on the rating label.
1)
2)
3)
Warning: T he plug socket,
electric appliances or the
appliance which are liable
effected by heat and moisture
should be kept away from
any vents on the oven.
2. Stacking and installation of the
microwave oven.
The maximum height of
stacking shall be two layers.
Specific stacking installation is
as follows
(A) Unscrew and remove the
mounting plate, and then
tighten the screws.
(B) Remove the four screws as
shown in Figure.
(C) Mount the mounting plate to
the lower position and fix the
screws that are just loosened.
4)
Fig 1
OPEN
4.0 inch (10cm)
12 inch (30cm)
4.0 inch (10cm)
A
B
C
Fig 2
Summary of Contents for 1834G1F-BS
Page 2: ......