WARRANTY
For warranty information, refer to http://www.middleatlantic.com/company/about-us.aspx#warranty
Corporate Headquarters
Voice: 973-839-1011 - Fax: 973-839-1976 - International Voice: +1 973-839-8821 -
Fax: +1 973-839-4982 - www.middleatlantic.com - [email protected]
Middle Atlantic Canada
Voice: 613-836-2501 - Fax: 613-836-2690 - ca.middleatlantic.com -
Middle Atlantic EMEA Technical Support
Voice: +31 (0) 495 726002 - [email protected]
Factory Distribution
United States: New Jersey, California, Illinois - Canada: Ontario - The Netherlands: Weert
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
NOTE
: Generic hinges shown. Inset, partial, and full overlay hinges all have adjustment screws in
similar locations and make the same movements.
• If necessary, use a #2 Phillips screwdriver to adjust door hinges as shown. (
FIGURE C
)
ADJUSTING THE DOOR(S)
FIGURE C
Side Adjustment
Depth Adjustment
Height Adjustment
UNDERSTANDING NEXT STEPS
Attaching your display(s) (display(s) not included) to the horizontal extrusion of the display mount option
(C3-XX-LDXU, if purchased) must be done as the final part of your C3 installation process.
For more information, refer to "Attaching Your Display to the Horizontal Extrusion" on page 11 of the C3
Series Display Mount Option (C3-XX-LDXU) Instruction Sheet (100-00034).
Page 8
