FAN FAULT/OVERTEMP ALARM OUTPUTS (For Optional Remote Monitoring): These normally open
dry contact closures will provide notification to an external (remote) monitoring system if there is a fan
fault or overtemp condition.
TEMPERATURE PROBE: 9 foot temperature probe. Mount at the highest available location in the
enclosure.
5 VDC - 2A POWER SUPPLY INPUT
INTAKE CONTROL PORT: RJ45 port used to control the intake unit.
(DO NOT CONNECT TO A LAN)
TIP: Ensure that you have access to the rear of the panel to make connections and configure settings
once mounted. If access to rear of unit is limited, cable management and setting configurations must be
done prior to mounting the panel.
INSTALLATION
FEATURES CONTINUED
UQFP-4RA-I/O INTAKE - EXHAUST SYSTEM
- The UQFP-4RA-I/O system consists of a UQFP-4RA and a UQFP-4RIS.
1) For optimum performance install the exhaust unit in the uppermost rackspaces of the enclosure, and
install the intake unit in the lowermost rackspaces of the enclosure.
2) Mount the temperature probe at the highest available location in the enclosure.
2
3
4
5
1
DO NOT OPEN. NO USER SERVICEABLE PARTS INSIDE.
TO EXHAUST ONLY
(NO LAN)
1
REAR VIEW UQFP-4RIS
EXHAUST CONNECTION PORT: RJ45 port. Connect this to the INTAKE CONTROL PORT on the
UQFP-4RA provided with the UQFP-4RA-I/O INTAKE - EXHAUST SYSTEM (connect to callout #5 on
the image from page 2). A 7 foot CAT5 cable is provided. (DO NOT CONNECT TO A LAN)
- The UQFP-4RIS can also work in conjunction with a separately purchased UQFP-4RX or
UQFP-4DRX (connect to callout #5 on the image from page 2). (DO NOT CONNECT TO A LAN)
Page 3
