The FARGO
™
Fan
Set-Up and Maintenance
Instructions Sheet
Figure 1
1.
Carefully remove from
package.
Figure 2
ELECTRICAL REQUIREMENTS
Table fan requires a grounded electrical supply line of
120 volts AC, 60 Hz, 15 amp circuit. 8 ft power cord
included.
NOT for Damp Location Use.
Set Up:
2.
Plug directly into the
socket.
Figure 3
3.
Select the desired airflow,
located on back of fan base by
rotating switch clockwise
Maintenance — To Clean Your Fan:
Periodic cleaning of your new fan is the only maintenance
that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the
fi
nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to
fi
nish.
CAUTION
Do not use water when cleaning your fan. It could
damage the motor or the finish and create the possibility
of electrical shock.
▲
WARNING
To Avoid Fire Or Electrical Shock, Do NOT Use This Fan
With Any Solid-State Speed Control Device And Do NOT
Use By Open Window.
