Page 6
UPDATING RACKLINK DEVICE FIRMWARE
NOTE
:
• The current firmware version installed on your RackLink appears on the lower-left of all browser-based
interface screens.
•
For more information about firmware updates, refer to the “Select Series PDU with RackLink User
Manual”
at www.middleatlantic.com/downloads, or contact support at 1-800-266-7225.
1. Access the latest version of the RackLink device firmware
.
2. Sign in to the browser-based interface using the admin/admin account.
3. Click
Menu > Firmware
.
4. Click
Choose File
and locate the latest version of the firmware from Step 1.
5. Click
Upload
.
The screen indicates that it’s uploading the firmware file and eventually shows a completed
status.
6. Click
Restart Unit
.
The Upload Reminder pop-up appears.
7. Click
Restart
.
At this point, the unit will restart, install the new firmware, and return to the main page.
ALERT LED STATES
An LED labeled ALERT on your PDU indicates various states. This table explains how to interpret the
LED states.
TROUBLESHOOTING
Forgotten Password
Press the Restore Defaults button on the device. This will default the login and password to admin/ad-
min.
NOTE
: Pressing this button also defaults the device to using DHCP.
Cannot Access User Interface
Check to see if you can access a general webpage. Verify the green LED on your Ethernet port is lit
solid and the yellow LED is blinking.
Unit Will Not Operate After Firmware Upgrade
Contact support at 1-800-266-7225.
RackLink Not Receiving Power
Check that your power cable is securely fastened and confirm the circuit breaker on the unit is in the ON
position.
Plug another device into the same receptacle and see if the other unit receives power.
Alert LED State
What It Means
Blinking Green
Acquiring IP address (during startup).
Green
Normal operation, IP acquired, and no alarms.
Blinking Green/Red
No alarms, running on default IP (DHCP not acquired).
Blinking Red
Lost IP connection.
Red
Network is active, alarms present.
Summary of Contents for RackLink RLNK-1015V
Page 8: ......
