Chapter 4: Using the Command Line Interface
156
Determine the privacy protocol:
config:#
user modify <name> privacyProtocol <option6>
Variables:
•
<name> is the name of the user whose settings you want to change.
•
<option6> is one of the options:
DES
or
AES-128
.
Option
Description
DES
DES privacy protocol is applied.
AES-128
AES-128 privacy protocol is applied.
Changing the Role(s)
This command changes the role(s) of a specific user.
config:#
user modify <name> roles <roles>
Variables:
•
<name> is the name of the user whose settings you want to change.
•
<roles> is a role or a list of comma-separated roles assigned to the specified user profile. See
Changing Measurement Units
You can change the measurement units displayed for temperatures, length, and pressure for a specific user profile.
Different measurement unit commands can be combined so that you can set all measurement units at a time. To combine
all commands, see
Note: The measurement unit change only applies to the web interface and command line interface.
Tip: To set the default measurement units applied to the PDU user interfaces for all users via CLI, see Setting Default
Measurement Units (on page 98).
Set the preferred temperature unit:
config:#
user modify <name> preferredTemperatureUnit <option1>
