Chapter 4: Using the Command Line Interface
156
Variables:
•
<name> is a string comprising up to 32 ASCII printable characters.
•
<privilege1>, <privilege2>, <privilege3> and the like are names of the privileges assigned to the role. Separate each
privilege with a semi-colon. See
(on page 101).
•
<argument1>, <argument2> and the like are arguments set for a particular privilege. Separate a privilege and its
argument(s) with a colon, and separate arguments with a comma if there are more than one argument for a privilege.
All Privileges
This table lists all privileges. Note that available privileges vary according to the model you purchased. For example, a PDU
without the outlet switching function does not have the privilege "switchOutlet."
Privilege
Description
acknowledgeAlarms
Acknowledge Alarms
adminPrivilege
Administrator Privileges
changeAuthSettings
Change Authentication Settings
changeDataTimeSettings
Change Date/Time Settings
changeExternalSensorsConfiguration
Change Peripheral Device Configuration
changeModemConfiguration
Change Modem Configuration
changeNetworkSettings
Change Network Settings
changePassword
Change Own Password
changePduConfiguration
Change Pdu, Inlet, Outlet & Overcurrent Protector
Configuration
changeSecuritySettings
Change Security Settings
changeSnmpSettings
Change SNMP Settings
changeUserSettings
Change Local User Management
clearLog
Clear Local Event Log
firmwareUpdate
Firmware Update
performReset
Reset (Warm Start)
switchOutlet*
Switch Outlet
