
Page 3
NOTE
: This instruction sheet covers the general installation of Tool-less Rackmount Accessories using
the 2A Lacer Bar (Model No. FWD-LB-2A-4PK). All of the Tool-less Rackmount Accessories install similar
to the method explained in this topic.
1. Fasten the hook on one side of your accessory into your desired center
hole as shown. (
FIGURE A
)
2. Gently push your accessory toward the fastened side while swinging the
hook on the other side of your accessory into the other center hole.
(
FIGURE B
)
NOTE
: Ensure the tool-less clip hooks on your accessory are fully fastened into your desired center holes
as shown. (
FIGURE C
)
INSTALLING YOUR ACCESSORY
FIGURE C
FIGURE A
FIGURE B
NOTE
:
View from inside of rackrails
showing hooks fully fastened
into center holes.
NOTE
:
Center hole
location
examples
shown from
outside of
rackrails.
Hook one
side.
Gently
Push
Hook the other side.