Page 3
FIGURE A
1) Remove security clips located at top and bottom of unit.
(FIGURE A)
2) Remove pivot pins located at the top and bottom of
backpan.
(FIGURE B)
3) Separate backpan from center section and determine hinge side.
4) If mounting to backpan to wood framed wall, secure two
(2) 3/4"plywood sheets directly to wall studs.
(FIGURE C)
NOTE:
A minimum 4” clearance above and below rack is required.
5) Using 3/8” toggle bolts and standard flat washers, mount backpan to plywood.
(FIGURE C)
NOTE:
Unit must be installed plumb and level.
NOTE:
All mounting holes must be used.
NOTE:
The mounting methods outlined below can be used for all model EWRs.
NOTE:
EWR can be mounted to block wall.
(Installation not evaluated by UL)
MINIMUM 4”
CLEARANCE
STUD
3/4”
PLYWOOD
SHEETS
(2)
FIGURE B
PIVOT PIN
SECURITY CLIP
MINIMUM 4”
CLEARANCE
MINIMUM 4”CLEARANCE
MINIMUM 4” CLEARANCE
FIGURE C
INSTALLATION
NOTE:
EWR center section can be opened from left-to-right or vice
versa depending on how backpan is installed.