EQUIPMENT LOADING AND SQUARING PANELS
To eliminate the possibility of a center bow in the
frame, Middle Atlantic Products suggests that the
squaring panels be left in place until some of your
components have been mounted.
RACK ASSEMBLY (Continued)
Page 11
5) Install (2) support brackets on pre-installed rackrail mounting studs using (4) 10-32 hex head
screws.
(FIGURE E)
NOTE:
Support brackets only included with larger racks.
Nuts 10-32
(2 Per
Squaring
Panel)
Support Brackets (2)
(Included with
larger racks)
Top Trim Panel
Phillips Head
Screws (2) 10 -32 x 1/4”
6) Lay assembly on a flat, level surface and square frame on all
four corners. (
FIGURE F
)
FIGURE F
(CORRECT)
(INCORRECT)
RACK
RACK
7) Tighten all flange nuts.
8) Install top trim panel using (2) 10-32 x 1/4” screws.
(FIGURE G)
NOTE:
Top trim panel contains only two screw holes.
1) Construct rough opening and base.
2) Assemble frame.
3) Install cable carriers / rough-in pan.
4) Install service stand.
5) Attach frame to tracks and cable
carriers.
6) Assemble leash.
7) Tie cable to carriers.
8) Secure rack in millwork.
FIGURE E
FIGURE G
