background image

 
 

 

Document: 
SHARKY - User’s Guide 

2020/11/18 

 

 

Doc: UG_MDX-STWBx, Rev 1.7 

pag. 37 of 38

 

 

 

11. FCC 

11.1. Label and Compliance Information (FCC) 

A host product itself is required to comply with all other applicable FCC equipment 
authorization regulations, requirements, and equipment functions that are not associated with 
the transmitter module portion. 

The SHARKY module have been labeled with its own FCC ID number. If the FCC ID is not 
visible when the module is installed inside another device, then the outside of the finished 
product into which the module is installed must display a label referring to the enclosed 
module. This exterior label can use wording as follows: 

Contains Transmitter Module: 

FCC ID: 2AVSQSHARKY 

Or 

Contains 

FCC ID: 2AVSQSHARKY 

The SHARKY module is compliant with the following standards: 

FCC 15.247 

The SHARKY module is compliant to Part 15 of the FCC Rules: 

Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that may cause 
undesired operation. 

This device has been designed and complies with the safety requirements for portable 
(<20cm) RF exposure in accordance with FCC rule part 2.1093 and KDB 447498 D01 as 
demonstrated in the RF exposure analysis. Installers must ensure that this device must not be 
co-located or operated in conjunction with any other antenna or transmitter except in 
accordance with FCC multi-transmitter product procedures. 

Unauthorized repairs, changes or modifications could result in permanent damage to the 
equipment and void your warranty and your authority to operate this device under Part 15 of 
the FCC Rules. 

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if  

Summary of Contents for MDX-STWBP-R01







































Reviews: