Document:
SHARKY - User’s Guide
2020/11/18
Doc: UG_MDX-STWBx, Rev 1.7
pag. 29 of 38
6.2.1. Sharky PCB Antenna
Figure 25. Sharky Module Mounting for PCB Antenna
The Sharky module must be mounted leaving the antenna section of the PCB outside the host
PCB ad in Figure 15.
In this configuration, it is necessary to keep the output power of the last Bluetooth
channel (2480MHz) below 1dBm for regulatory limits. Or as an alternative, the last
Bluetooth channel must not to be used.
