Midas HERITAGE 3000 Operator'S Manual Download Page 55

Page: 55 / 78

Storing a Scene Cont.

Selecting a memory number and storing the memory:

Editing Midi (Program Change):

Assignment of Program changes to a Scene:

Inserting Scenes:

Copying Scenes:

a/ The numbers in the display can be altered as follows. Select either Act or Scene

using the ACT/SCENE C/O switch. You will see either act or scene illuminate
below the display.

b/ The digits can then be altered between 00-99 using the UP and DOWN keys. This

function is looping so if you are on 00 you can go directly to 99 by scrolling down.

c/ To store a scene press STORE in the scene is new then it will just be stored and the

screen will display done. If the scene already exists then the display will read
over_str and you will need to press the confirm button. The screen will then read done.

a/ Pressing the MIDI button places you in the

menu.

b/ Using the UP and DOWN buttons scroll through OUT01 to 04 until the required

message is reached. (On the Heritage there are a maximum of 4

out messages

that can be sent per recalled scene). Press CONFIRM.

c/ Using the UP and DOWN buttons scroll through the menu until the screen reads PROG.

Press the CONFIRM button

d/ The window will read CH00, using the UP and DOWN keys a channel between

01 to 16 can be selected. Press CONFIRM.

e/ The window P000, using the UP and DOWN keys a program, change between

00 and 127 can be selected. Press confirm and you will be dropped back to the first
level of the menu. When the desired messages have been edited press the MIDI button
again to drop out of the menu.

f/ To then store the

information with the scene the STORE button must be pressed

followed by CONFIRM

a/ Once a scene has been stored press the STORE button so that the display reads

OVER/STOR.

b/ Press the UP key until the display reads PRCH then press CONFIRM.
c/ Using the UP or DOWN key chose the required

program change you wish the

scene to be recalled by. You have the choices NONE, Program Changes 000-127.

a/ Once you have created the scene you wish to insert edit the act/scene number display

using the ACT/SCENE, UP and DOWN buttons until the desired position is displayed.

b/ Press the INSERT switch. The screen will then display

. The original scene and

any scene preceding it will then be incremented by one position.

NB The INSERT button will only be illuminated if a scene exists where you wish to place the scene, otherwise
STORE may be used as normal.

a/ Recall the scene you wish to copy by selecting the scene number and pressing the

NOW button.

b/ Press the COPY button.
c

d/ The act/scene numbers can now be scrolled through using the ACT/SCENE,UP and

DOWN buttons until the desired position is reached, then press the STORE button.

MIDI

/ The MIDI Button will be illuminated as default which indicates that the midi out

messages will also be copied with the scene. If you do not wish the midi out information
to be copied to the new scene press the MIDI button so that the light is extinguished.

done