Midas APOLLO QA018, Mounting Instruction

Page: 6 / 25

5
MIDAS Group 2020
!
NOTE! Connection to water installation in the room may be performed by means of
flexible connection hoses in metal shielding, ended with metal nuts. Additionally,
you may apply water valves equipped in water filters. All above indicated
components may be purchased in hydraulic stores.
CONNECTING THE CABIN INTO WATER INSTALLATION
1. Connecting water to cabin water installation should be carried out through
water valves. Placing the valves will facilitate easier potential dismounting of
the cabin with the need to switch off the main water valve for the room.
2. Cold and hot water must be connected to a single lever shower mixer. The
mixer has led out outer external threads 1/2” to which cabin water feed must
be screwed in.
3. The water system of feeding water accessories of the cabin is designated for
installing in the water supply network with a maximum water pressure from
0,1MPa to 0,5 MPa and water temperature not exceeding 90°C.
4. To mount water installation in the cabin, use non-crimping keys with smooth
surfaces of jaws, preferably secured with a cotton fabric.
5. Having connected water and the accessories (hand shower, upper shower,
water nozzles) check the tightness of the whole water system. If necessary,
correct the leaks.
6. Having checked tightness of all inlet and outlet connections as well as water
distribution points, place the cabin in its designated location.
ball valve
Water tube in metal shielding (water
inlet to cabin mixer)
fixed water
installation pipe of
the room