MP90-NB User Manual V1.0
http://www.mictrack.com
3
Attach back housing cover
Device is ready
(Diagram #1)
(Diagram #2)
5.2 Install the Device
Directly insert the ODB tracker to vehicle’s OBD2 interface
5.3 LED Indications
5.3.1 SYS-System indicator (
RED
)
Status
Description
Always ON
No SIM Card (or) No Network Reception
Quick flash
Access network successful
5.3.2 GPS-GPS indicator (
BLUE
)
6. Setup and Configuration
If you use NB-IoT SIM card, ONLY can setup the device via USB Config
cable(because NB-IoT SIM do not support SMS)
If you use Cat M1 SIM card, you can setup the unit via following SMS commands
(6.1-6.15) or via USB Config cable.
Download the USB Config tool and guide/video from the link:
6.1 Setting Authorized Mobile Phone Numbers
SMS Command format: mobile p[command parameter]
Note: Command Parameter here is the sequence of the mobile number
i.e. [1=Admin] or [2=SOS call number]
For example: *13424392330*0000*1**
Status
Description
OFF
GPS / Satellites Unavailable – Out of Range
Blinking
GPS/Satellite Locked – Normal Mode
