HP COMMERCIAL Inverter iMAX60 / iMAX110
I n s t a l l a t i o n a n d u s e r m a n u a l
P a g e
1 3
V e r s i o n : 0 4 / 2 0 2 0
c.
Temperature Setting
Press
and
to display and adjust set temperature.
d.
Mode Selection
1)
Heating/Cooling/Auto
Press “
” to switch among heating ”
”, cooling ”
” and auto mode ”
”.
Heating mode “
”: Water temperature setting range(18-40°C)
Cooling mode “
”: Water temperature setting range(12~30°C)
Auto mode “
”: Water temperature setting range(12~40°C)
* When water inlet temperature is higher than setting point, automatic cooling mode starts.
* When water inlet temperature is lower than setting point, automatic heating mode starts.
2)
Silence/Boost mode selection
Press “
” to switch among boost mode
, silence mode
Default mode: boost
Please choose boost mode
for initial heating
e.
WIFI
When the screen is on, press “
”for 3 seconds, after “ ” flashing, enter Wi-Fi connection.
Connect Wi-Fi on mobile phone and input password, and then control equipment by Wi-Fi.
When APP connects Wi-Fi successfully
，
“ ” lights on.
f.
Defrosting
1)
Automatic defrosting: When machine is auto defrosting,
will flash, and return to previous
working mode when it finishes.
2)
Manual Defrosting: To enter forced defrosting mode, the compressor must be working more
than 10 minutes. in heating mode, press “
” and “
” on touch controller simultaneously
for 5 seconds to start forced defrosting, ”
” is flashing and defrost starts, “
” stop flashing
and defrosting stops. (Remarks: the interval between manual defrosting should be more than 30
minutes.)
H
E
A
T
P
U
M
P
MI
C
R
O
W
E
L
L H
P
