MDS 05-4055A01, Rev. A
MDS entraNET 900 System Guide (Preliminary)
59
release into the inactive position and place it in service whenever you
desire.
Figure 2-33. Reprogramming Menu
(Shown with “Image Copy” Selected)
•
TFTP Host Address
—IP address of the host computer
from which to get the file. [Any valid IP address]
•
Filename
—Name of file to be received by the TFTP server.
[Any 40-character alphanumeric string] Verify that this corre-
sponds to the TFTP directory location. May require sub-direc-
tory, for example:
br\inet-bkrf-3_1_0.ipk
.
•
TFTP Timeout
—Time in seconds the TFTP server will wait
for a packet ACK (acknowledgment) from the transceiver
before suspending the file transfer. [10 to 120 seconds; 10]
•
Retrieve File
—Initiate the file transfer from the file from
TFTP server. Placed into inactive firmware position in the trans-
ceiver’s non-volatile memory [Y, N]
•
Image Verify
—Initiate the verification of the integrity of
firmware file held in unit.
•
Image Copy
—Initiate the copying of the active firmware into
the inactive image.
•
Reboot Device
—Initiate rebooting the transceiver. This
will interrupt data traffic through this unit, and the network if
performed on an Access Point. Intended to be used to toggle
between firmware images.
NOTE:
See “Upgrading the Firmware” on Page 59
on setting up the TFTP server.
Upgrading the Firmware
From time-to-time MDS will offer upgrades to the transceiver firmware.
One version of the firmware provides core software resources for all
radio models. Uploading new firmware into the unit will not alter any
privileges provided by Authorization Keys and does not require the
transceiver to be taken off-line until you want to operate the unit from
the new firmware image in the unit.
Library Admin Office
Reprogramming Menu
-==========================================================================-
A) TFTP Host Address 10.4.2.1
B) Filename entranet-bkrf-3_1_0.ipk
C) TFTP Timeout 120 sec
D) Retrieve File
E) Image Verify
F) Image Copy
G) Reboot Device
Current Firmware Image 1: 1.1.0 (active)
Image 2: 1.1.0
Select a letter to configure an item, <ESC> for the prev menu
Summary of Contents for MDS entraNET 900
