Infinity
Poll Worker’s Manual
MicroVote Corporation
3
Setting Up the Voting Panel
MicroVote Infinity voting machines should be set up in such a
way that voters feel they have enough privacy to cast their vote.
MicroVote recommends placing voting machines so that the
voter’s back is to a wall while voting. Make sure that power is
available (either an outlet or extension cord) within six feet of the
voting machine.
Setting up the voting machine itself is a simple procedure. Follow the steps on the
next few pages to set up each Infinity voting panel to be used on Election Day. One
booth will have a handicap label. That is the panel per voting location that has
certain features which satisfy the ADA (Americans with Disabilities Act)
requirements. See
Appendix 1
located on page 44 for additional instructions to set-
up this booth and panel.
1. Lay the voting booth on a flat surface with the topside up and the case latches
facing you.
2. Open the case and lift the lid.
Infinity booth with lid open and Infinity panel placed inside
Setting up the Voting
Panel on Election
Day
PDF created with pdfFactory trial version