Microvoice Corporation Formula-1 User Manual Download

Page: 27 / 72

-4

Expansion Floppy Disk Drives

The floppy disk drive,

which

can

expanded

is limited to

2 units 5.25” or 8” disk drives only.

D e t a i l s a r e a s

Drive A

System Floppy Disk Drive

two-sided double density)

D r i v e

System

Floppy Disk Drive

(5.25’ two-sided double density)

Drive C

Expansion

Floppy Disk Drive

(5.25’ two-sided double density)

Drive D

Expansion Floppy Disk Drive

(5.25” two-sided double density)

Drive

Expansion Floppy Disk Drive

(8’ one-sided single density)

Drive F xpan sion Floppy Disk Drive

o ne-sided single density)

Drive

Expansion Floppy Disk Drive

(8’ two-sided double density)

Drive

H xpan sion Floppy Disk Drive

t wo-sided double density)

The logical and physical corresponds

the above devices

are as follows.

<Logical

Address>

Note

Drive A

Drive B

Drive C

Drive D

Drive

Drive G

Drive H

Drive

'A'

and Drive ‘B’ are mounted on the system unit.

[11] -5 BIOS

The BIOS must be

changed

to implement the

the

Formula-l.

The

BIOS

made by our company supports the floppy

disk drive of 5.25” two-sided double density, 8’ two-sided

double density and 8” one-sided single density.

Refer to the

item No. <

Expansion Floppy Disk Drives for detail

allocation of the disk drives.

Be careful

the following points.

The Formula-l’s

files

are

compatible with the

files of 8’ one-sided single

density diskette.

However, there are no compatibility with the

files

o f

5.25” and 8” two-sided double density

d i s k e t t e s .

In case

copying the

files from the

double density diskette made by the other company, the user must

so after once copying to the

files of 8” one-sided

single density diskette.

See the item No. <

Device Allocation > about the device

of Console, Reader, Puncher

and Printer.

-6 File Format

The filing

format

the floppy disk drives being used

in the Formula-l is

on the

following page.

T h e e x p l a n a t i o n

o f

one-sided single density has been omitted.

Summary of Contents for Formula-1









































































Search results

Summary of Contents for Formula-1

Reviews:

Related manuals for Formula-1

Brands by name

Popular brands

Microvoice Corporation Formula-1, User Manual

Search results

Summary of Contents for Formula-1

Reviews:

Related manuals for Formula-1

Brands by name

Popular brands