background image

iSERIES I30VD Network Dome Camera

·

Quick Operation Guide

 

  

EU Conformity Statement 

This product and - if applicable - the supplied accessories too 
are marked with "CE" and comply therefore with the 
applicable harmonized European standards listed under the 

Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS 
Directive 2011/65/EU. 

 

2012/19/EU (WEEE directive): Products marked with this 
symbol cannot be disposed of as unsorted municipal waste in 
the European Union. For proper recycling, return this product 
to your local supplier upon the purchase of equivalent new 
equipment, or dispose of it at designated collection points. 

For more information see: www.recyclethis.info. 

 

2006/66/EC (battery directive): This product contains a 
battery that cannot be disposed of as unsorted municipal 
waste in the European Union. See the product 
documentation for specific battery information. The battery 
is marked with this symbol, which may include lettering to 

indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return 
the battery to your supplier or to a designated collection point. For more 
information see: www.recyclethis.info. 

 

Summary of Contents for iSERIES I30VD
































Reviews: