Microtronics myDatasensMINI H2S 1000, User Manual, Page: 70 / 107

6. Click on the button to trigger the synchronisation (see ""Sync" tab when connected to the
myDatasensMINI H2S 1000" on page 69).
When you read out the data for the first time from a myDatasensMINI H2S 1000, you can
choose whether all of the saved data or only the data from a certain date onwards are read
out from the myDatasensMINI H2S 1000. During the following synchronisation processes, the
DeviceConfig configuration program always reads out the data from the last synchronised
measurement data record onwards.
Selecting the time period for which the data should be read out (only during first synchronisation)
1 Read out all of the saved data
Note: Reading out all of the saved data can take several hours depending on the
number of saved measurement data records.
2 Only read out the data from the selected date onwards. The data is always read out from
00:00 am of the selected day.
Important note: Following completion of the synchronisation it is no longer
possible to read out data before the selected date.
If the DeviceConfig configuration program determines that the myDatasensMINI H2S 1000has
been assigned to a new or different site on the myDatanet server, you can decide what you
would like to do with the data that is already saved locally. The following screenshot provides
an overview of the available options that can be selected.
Important note: If a site already contains data, then only the measurement data that is
newer than the current measurement data record for the site is synchronised.
70 Rev. 01