Microtronics myDatalogNANOamr, User Manual

Page: 30 / 125

Step 1 of the top-hat rail assembly Step 2 of the top-hat rail assembly
1 myDatalogNANOamr 3 Assembly loop (included in the scope of
delivery of 206.634)
2 Delta PT M3.5x8 Torx 15 (included in the
scope of delivery of 206.634)
1. First attach the assembly loop (3) using the screws (2) included in the "DIN rail mounting set
for myDatanet housing 86x126 (206.634)" equipment set to the myDatalogNANOamr (see
"Step 1 of the top-hat rail assembly " on page 30).
2. Place the assembly loop (3) onto the top edge of the top-hat rail. When turned slightly around
the horizontal axis of the myDatalogNANOamr with the assembly loop (3) attached, the
30 Rev. 01