17
2.1 About VESA Mount
The SK-156P-A1 series conform to the
“VESA Flat Display Mounting Interface
Standard
” which defines a physical mounting interface for touch monitor, and
corresponding with the standards of touch monitor mounting devices. The VESA
mount is located on the back of this unit.
VESA Mount
!
Warning!
Please select the MicroTouch original screws!
The distance between the back cover surface and the bottom of the screw hole
is 8 mm. Please use four M4 screws diameter with 8-10mm proper length to
mount your monitor.
Note: The mounting stand must be able to support at least 5.4 lbs (2.7 Kg).
!
Mise en garde!
Sélectionner les vis d’origine de MicroTouch!
La distance entre la surface du couvercle arrière et le bas de l’orifice de la vis
est de 8 mm et 18mm. Utiliser les vis M4 de diamètre pour le montage de
votre moniteur.
Remarque : Le support de montage do
it pouvoir supporter un poids d’au moins
5.4 lb (2,7kg).
Summary of Contents for SK-156P-A1
