MicroTouch M1-156DT-A1, User Manual

Page: 14 / 37

14
Input/Output Connectors
Remove the cable cover to access the I/O and power connectors.
Configuration and Cable Options
Single-cable option: The USB Type-C cable can supply monitor power, video signal, audio signal
and touch functionality if the computer/other source equipment has a USB Type-C output that is
capable of supplying those functions (USB Type-C with DP ALT mode and 12VDC @ 5A power).
Not
all USB Type-C sources have all the functionality; consult the documentation for your equipment. It is
important that the MicroTouch-supplied USB Type-C cable be used when using the single cable option.
Multiple-cable options : If a Type-C power source is not available, power is supplied by the included
AC-to-DC power
converter’s fixed 12 volt DC cable connector. Plug the DC barrel connector into the
DC IN jack on the monitor. Plug the AC power cable female connector into the receptacle on the power
converter, then plug the male connector of the AC cable into a wall outlet.
If a USB Type-C port is not available on the computer/source equipment, the included USB Type-C to
A cable must be used to connect to a USB type A connector on the computer/source equipment to
supply the touch output. An HDMI cable may be used to supply the video input. NOTE:
The connector
marked USB is not a touch output . It is a Type-A USB port that can be connected to any device that
has a USB Type-B port. This connection communicates via the USB Type-C cable connection to the
computer/source equipment.
The LINE OUT connector may be used to supply audio to an external speaker (must have amplification
and volume control).