13
Product Setup and Use
Input and Output Connectors
Power Connector
Power Input: 4-pin 24VDC power connector
24V DC in
Pin #
Signal Name
Pin #
Signal Name
1
24VDC
2
24VDC
3
GND
4
GND
NOTE: USE THE CORRECT POWER SUPPLY.
MicroTouch touch computer models IC-156P/215P-AW1 have similar power connectors, but they are
12 VDC. If you have a mix of different models, check the voltage rating on the power converter to
ensure it is the correct voltage for the touch computer model.
Communications Ports
RS-232: RS-232 serial communications port
USB 2*2: Two type-A USB 2.0 communications ports
USB 3*2: Three type-A USB 3.0 communications ports
USB3CM: USB Type-C with DP ALT mode and 5V@3A / 12V@3A output support
Network Connection
LAN : RJ-45 Ethernet network connector (Supports 10/100/1000Mbps)
Video Output
Mini DP: Miniature Display Port video output
Summary of Contents for IC-156P-AW3-W10
