MicroTouch DT-156P-A1, User Manual

Page: 21 / 34

21
2.1 About VESA Mount
The DT-156-A1 series conform to the
“
VESA Flat Display Mounting Interface
Standard
” which defines a physical mounting interface for touch monitor, and
corresponding with the standards of touch monitor mounting devices. The VESA
mount is located on the back of this unit.
!
Warming!
Please select the MicroTouch original screws!
The distance between the back cover surface and the bottom of the screw hole
is 8 mm. Please use four M4/8mm screws diameter with proper length to
mount your monitor.
Note: The mounting stand must be able to support at least 7.67 lbs (3.48 Kg).
VESA
Mount
!
Mise en garde!
Sélectionner les vis d’origine de MicroTouch!
La distance entre la surface du couvercle arrière et le ba
s de l’orifice de la vis
est de 8 mm. Utiliser les vis M4/8mm de diamètre pour le montage de votre
moniteur.
Remarque
: Le support de montage doit pouvoir supporter un poids d’au moins
7.67 lb (3,48kg).