SimpliFiber
ENGLISH - 16
CW/2kHz
Steady for continuous light source;
flashing for modulated light source,
Low Batt
Time to replace AA batteries
SimpliFiber
1310 Source has 4 red LED indica-
tors. The following describes the LED activity:
LED Name Description
1310nm
transmitting at 1310nm wavelength
AUTO
SimpliFiber
Meter is auto-sensing the
wavelength of
SimpliFiber
Source
CW/2kHz
Steady for continuous light source;
flashing for modulated light source,
Low Batt
Time to replace AA batteries
Calibration
The
SimpliFiber
Meter should be calibrated
annually with specialized Microtest equipment.
Contact Microtest Technical Support for informa-
tion on calibration and service requirements.
Technical Support
Note: All connectors and fiber end faces need to
be clean prior to testing. Use the appropriate
optical cleaning supplies to keep connectors and
couplers free from contamination.
Summary of Contents for SimpliFiber 1310 Source
Page 4: ...SimpliFiber ENGLISH 4...
Page 40: ...SimpliFiber ENGLISH 40...
