SimpliFiber
ENGLISH - 15
transmitted light.
The transmitted light can be operated
continuously or modulated. When measuring
power, use the continuous light source. When
identifying fiber cables with an identifier, use the
2kHz modulated mode.
Press MOD to toggle between continuous and
modulated lightsource. When Continuous Wave
is selected, the LED will show a steady light;
when 2kHz (modulated) is selected, the LED
will blink.
Use this feature with all third party power meters.
(
SimpliFiber
850/1300 Source) Press
λλλλλ
(Lambda) to manually switch the wavelength
between 850 nm and 1300 nm. Connect the
launch cable to the appropriate port.
LED Indicators
SimpliFiber
850/1300 Source has 5 red LED
indicators. The following describes the LED
activity:
LED Name Description
850nm
transmitting at 850nm wavelength
1300nm
transmitting at 1300nm wavelength
AUTO
SimpliFiber
Meter is auto-sensing the
wavelength of
SimpliFiber
Source
Summary of Contents for SimpliFiber 1310 Source
Page 4: ...SimpliFiber ENGLISH 4...
Page 40: ...SimpliFiber ENGLISH 40...
