CT-8750 User’s Guide
P 32
II.4.C
O/S End Detection
When run into the Open/Short whether to detect pins or not. If setup is NO that
speed would be faster, but do not detect the O/S end.
Press S1[PROG] to change setup to be YES
／
NO
II.4.D
Int. S/O Stop Mode
Press S1[PROG] to change setup to be AUTO
／
TIMER
AUTO
：
The system is repeatedly testing until the DUT cables completely take off
then stop automatically.
TIMER
：
To follow the test time doing test
II.4.E
Int. O/S Timer
Use alphanumeric to key in Int. O/S timer, but if mode setup is AUTO and this
setting will not work
II.5
Statistic Report
You can view the statistics report by just press [Stat] key. The report includes
total test amounts, pass/fail amount and fail analysis in quantity/percentage.
Operation Procedure
(a)
Press [Stat], LCD display as following
(b)
Press S1[QTY.RATE] to display in percentage mode
