4
Position Documents
1. Raise the scanner lid.
2. Place the document to be scanned facing down
on the glass surface of the scanner. Center the
top of the document along the horizontal ruler
on the scanner.
3. Lower the scanner lid.
Basic Scanning for PC Users
1. Place the document to be scanned on the scanner’s glass surface.
2. Launch ScanWizard DI
(either as a stand-alone by clicking the program icon, or by
using the “File-Import” or “Scan” command from an application program).
3. Specify your scanning requirements in the ScanWizard DI control panel.
a) Select
Flatbed
as your image input device in the Scan Source drop-down menu.
b) Select your image output type in the Scan Type drop-down menu.
– Select
RGB Color (24 bits)
to scan the image in color.
– Select
Grayscale (8 bits)
to scan the image in grayscale.
– Select
Black & White (1 bit)
to scan the image in black-and-white.
c) Select a dimension in the Paper Size drop-down menu as your preview image size.
d) If the Auto-crop & Auto-deskew option is selected, the scanner automatically
detects the size of the original image, crops the full scan frame to fit the image,
and removes unwanted black borders after the scan, as well as corrects the
distorted image for proper alignment.
e) Select your desired image output resolution in the Resolution drop-down menu.
4. Click the
Preview
button to perform a preliminary view of the entire image. When
done, a preview image appears in the preview window.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
10
01
'
2'
02
0
30
40
50
NOTE: To scan a book or thick
documents, you may lift the scanner
lid out of its hinge sockets. Then,
align the inner margin of a book along
the edge of the scanner glass surface
as indicated in the graphic, using the
arrow printing mark on the horizontal
ruler as a point of reference.
Summary of Contents for XT3300
Page 10: ...10...
