WEM SPECIFICATIONS
(cont’d)
Power Injection Module
MECHANICAL
Physical
Plastic
housing,
not
weatherproof
Dimensions
2.6” x 2.6” x 1.1”
Weight
2.5
oz
Interface
2 – RJ45 connectors
POWER
Power Requirements
12 VDC 500 mA (wall transformer supplied)
Power-over-Ethernet (PoE)
PoE “mid-span” compliant (pins 4,5 positive – pins 7,8
ground)
Indicator
LED
-
red
Connectors
DC Jack 2.5 mm x 5.5 mm center positive, 2 – RJ45
ENVIRONMENTAL
Humidity
95%
non-condensing
Operating Temperature
-20F to +150F
System Ranges
POINT-TO-POINT SYSTEMS_______
Up to 2500 Feet
Integral directional patch antennas on both WEMs
Up to 2 Miles
Integral directional 6 x 6 13-dBi patch antennas on both
Up to 12 Miles
Integral directional 6 x 6 13-dBi patch antenna on the Host
with integral directional patch antenna in 25 dBi dish
antenna on the Client
Up to 30 Miles
Integral directional patch antennas on both WEMs mounted
in 25 dBi dish antennas
Distance specifications assume an optimal environment (see pg ii for details)
MULTI-CONNECT
SYSTEMS
Up to 500 Feet
Integral omni-directional patch antennas on both the Host
AP WEM & Client SU WEM
Up to 1300 Feet
Integral omni-directional patch antenna on the Host AP
WEM & integral directional patch antenna(s) on the Client
SU WEM(s)
Up to 2500 Feet
Integral directional patch antenna on the Host AP WEM &
Client SU WEM(s)
Up to 1 Mile
Integral directional patch antenna on the Host AP WEM &
integral directional 6 x 6 13-dBi patch antenna(s) on the
Client SU WEM(s)
Up to 6 Miles
Integral directional patch antenna on the Host AP WEM &
Client SU WEM(s) – Client SU WEM(s) mounted in 25 dBi
dish antenna(s)
Distance specifications assume an optimal environment (see pg ii for details)
*For product improvement, design and specifications are subject to change without notice.
- 20 -
