9
2.3 ID Remote Control
ID Setup Procedure
① Before setting up the remote control ID, set up the unit address of DVR. (The initial value is 0.)
② While pressing and holding down the ID button, enter a two-digit unit address of the corresponding DVR.
③ If the unit address is a single digit, enter a two-digit number by adding the number 0 as the first digit.
( Example – If the unit address is ‘1’, the input value is ’01’.)
*
*
※
A single remote control can change ID from 0 to 19, and independently control up to 20 DVRs.
ID
Record
Rotate
Display
Menu
Escape
Lock (Logout)
/ Section Repeat
Number
PTZ Zoom
PTZ Focus
PTZ Preset
PTZ IRIS
▲ Arrow
Confirm
▼ Arrow
▶ Arrow
Fast Rewind
Play / PTZ
Fast Forward Play / Play
Backup
Pause
Reference
◀ Arrow
Search
