2
Step 3:
Unlock Scanner
A.
Remove the yellow “Step 3” sticker from your scanner.
B.
With the scanner power off, tilt the front right corner of
the scanner to see the locking screw at the bottom.
C.
Using a screwdriver, push and turn the locking screw
counterclockwise to the unlock position. When
successfully unlocked, the screw will push out a little,
protruding slightly from the bottom of the scanner.
Step 4:
Connect Scanner
To the power adapter
A.
Remove the yellow “Step 4” sticker from
your scanner.
B.
Connect the power cord to the back of the
scanner.
C.
Plug the power cord into a power source.
To the Hi-Speed USB cable
D.
Connect one end of the cable to your
computer.
E.
Connect the other end of the cable to the
scanner.
F.
Press the power button at the front panel of
your scanner, and wait for the lights to stop
blinking and stay on steady.
The system will detect your scanner
automatically.
Power button
F
B
C
D
E
NOTE
: To lock the scanner (for shipping and other reasons), refer to
the ArtixScan M2 Supplement in the Microtek software CD/DVD.
