Microtek ArtixScan DI 2015c, Start Here Manual

Page: 5 / 10

5
Scan a Stack of Documents
1. Place the stack of documents to be scanned on the Document Feed Tray of the Auto
Document Feeder (ADF).
WARNING : Do not place photo paper or fragile sheets of paper on the feed tray, as doing this
will damage the original photo or frail papers during the feeding process. Always place frail
originals on the scanner glass surface, and choose “Flatbed” as your “scan source.”
2. Launch ScanWizard DI — either as a stand-alone by clicking the program icon, or by
using the File-Import or Scan command from an application program.
3. Specify your scanning requirements in the ScanWizard DI control panel.
a) Select ADF (Simplex) in the Scan Source drop-down menu as your image input
device.
b) Select the appropriate image type (e.g., Black & White) in the Scan Type drop-
down menu as your image output type.
– Select RGB Color (24 bits) to scan the image in color.
– Select Grayscale (8 bits) to scan the image in grayscale.
– Select Black & White (1 bit) to scan the image in black-and-white.
c) Select a dimension in the Paper Size drop-down menu as your preview image size.
d) If Auto-crop is selected, the scanner automatically detects the size of the original
image, crops the full scan frame to fit the image, and removes unwanted black
borders after the scan.
e) Select a desired resolution in the Resolution drop-down menu for your image
output resolution.
4. Select the image type (e.g., Text) in the Attribute drop-down menu as your image
type.
– Select Line Art to scan line art images (images in one color or in black-and-white,
such as logos or mechanical blueprints).
– Select Photo to scan color prints.
– Select Text to scan text.
5. If necessary, adjust image quality by using the image correction tools.