5
7. Go to the “General” panel by clicking the
General
tab in the Settings window. Specify
the settings for your requirements there.
a) Select the image type in the
Document Type
as your input image type.
– Select
Photo
to scan color prints.
– Select
Text
to scan text.
b) If necessary, check “Remove Blank Page” and “Remove
Punch Hole” to enhance the quality of the scanned
images.
8. If necessary, go to the “Image Process” panel by clicking the
Image Process
tab in
the Settings window. Use the image correction tools presented there to enhance the
image quality according to your specific requirements.
9. Click the
OK
button to close the Scan Setup interface and return to the Main interface
of ScanWizard DI.
10. In the Main interface, click the
File Format
menu button to select a file format for the
scanned images.
11. In the Main interface, click the
File Name
menu button to specify a file naming method
for the scanned images.
12. In the Main interface, select and click the
Normal Scan
button to start scanning.
When done, the scanned images will be automatically saved into the folder defined in
the File Location menu box. At the same time, the scanned images will be displayed
in thumbnail sizes in the Thumbnail View window and labeled with the file name and
file format specified earlier.
13. Click the
Open Folder
button to locate the scanned images if you want to view.
NOTE:
For more details on other scanning scenarios applicable to your scanner, refer to the
scanner’s User’s Manual in the Microtek Software CD/DVD.
