4
Scanning Documents
1. Put the document to be scanned facing down on the scanner’s scan bed.
2. Launch ScanWizard DI as a stand-alone program by clicking on the
ScanWizard DI
icon
on the desktop.
3. Click the
Scan Setup
button in the interface to activate the Scan Setup interface.
4. In the Scan Setup interface, follow the steps below to specify your basic settings.
a) Select
Flatbed
in the Scan Source as your image input
device.
b) Select the appropriate image type in the
Color Mode
as
your image output type.
– Select
RGB Color (24 bits)
to scan the image in color.
– Select
Grayscale (8 bits)
to scan the image in
grayscale.
– Select
Black & White (1 bit)
to scan the image in
black-and-white.
– Select
Auto Color Detection
to scan the image in color or non-color based on
the automatic judgement and detection of the system.
– Select
Complex
to scan the image in color, grayscale or non-color based on the
customization.
c) Select a dimension in the
Paper Size
as your preview
image size.
d) Select a desired resolution in the
Resolution
for your
image output resolution.
e) If “Auto-crop” & “Auto-deskew” is selected, the scanner
automatically detects the size of the original image,
crops the full scan frame to fit the image, and removes
unwanted black borders after the scan, as well as corrects
the distorted image for proper alignment.
5. Click the
Show Preview Window
and
Show Setting Window
tabs in the Scan Setup
interface to display other interfaces which are helpful for your scanning processing.
6. Click the
Preview
button to perform a preliminary view of the entire image. When
done, a preview image appears in the Preview window.
