Introduction 2
miriac SBC-LX2160A User Manual
V 1.6
7/71
© MicroSys Electronics GmbH 2021
2
Introduction
Thank you for choosing the MicroSys SBC-LX2160A Single Board Computer
system. This manual should help you to get the best performance and details out
all of its features.
2.1
Safety and Handling Precautions
ALWAYS use the correct type and polarity of the power supply!
DO NOT exceed the rated maximum values for the power
supply! This may result in severe permanent damage to the
unit, as well as possible serious injury.
ALWAYS keep the unit dry, clean and free of foreign objects.
Otherwise, irreparable damage may occur.
Parts of the unit may become hot during operation. Take care
not to touch any parts of the circuitry during operation to avoid
burns, and operate the unit in a well-ventilated location.
Provide an appropriate cooling solution as required.
ALWAYS take care of ESD-safe handling!
Many pins on external connectors are directly connected to the
CPU or other ESD sensitive devices.
Make or break ANY connections ONLY while the unit is
switched OFF.
Otherwise, permanent damage to the unit may occur, which is
not covered by warranty.
There is no separate SHIELD connection.
All the metal sheaths of shielded connectors are connected to
GND.
Also, all mounting holes of the carrier board are connected to
GND.
The module’s mounting holes are not connected to GND
Take this into account when handling and mounting the unit.
DO NOT REMOVE THE MODULE FROM THE CRX-08 CARRRIER
UNLESS INSTRUCTED BY MICROSYS.
IF THE MODULE NEEDS TO BE REMOVED, USE EXTREME
CARE AND ONLY EXERCISE EQUAL FORCE / PRESSURE ON
THE BOARD-TO-BOARD CONNECTORS. DO NOT TILT / SHIFT
THE MODULE DURING MATING OR REMOVAL.
Table 2-1 Safety and Handling Precautions
