System Description 4
miriac EK-5744 User Manual
V 1.2
22/53
© MicroSys Electronics GmbH 2017
4.8 Power Supply
4.8.1 Input Supply Rating
The EK-5744 system is run from two power supplies. One is used for the processor
part, while the second one handles the digital output part of the system.
Both power inputs of the EK-5744 system are protected against wrong polarity and
over-current.
DO NOT exceed the rated maximum values for the power
supply! This may result in severe permanent damage to
the unit, as well as possible serious injury.
4.8.2 Controller Part Power Connector
The supply should have the following ratings
Input Voltage Operating Range:
24V DC +/-5% 100mA
Power is fed to the processor unit via the 2-pin pressure clamp PWR
Manufacturer:
Würth Elektronik
Type:
691-101-710-002
Mates with:
1-2mm² wire
The power is indicated by a green LED beside the connector.
Figure 4-10: Controller Power Part
Connector
