Quick Start Guide 3
miriac SBC-LS1028A User Manual
V 1.0
10/65
© MicroSys Electronics GmbH 2019
3
Quick Start Guide
3.1
Prerequisites
Always make sure to handle the SBC-LS1028A unit in an ESD-safe manner.
Otherwise, the unit may suffer permanent damage.
Do not place the unit directly flat on a metal surface, as this may result in short
circuits and damage to the board.
First unpack the unit and make sure that it is clean and free of visible damage or
foreign objects.
Minimum Requirements
To operate the board, you will at least need the following items:
■
a 12V DC (min 2A) power supply
– delivered with the kit
■
a USB cable (type A
– mini B) – delivered with the kit
■
a serial terminal, such as a PC with a USB port running a terminal Software
(e.g. TeraTerm, HyperTerminal, putty, ckermit...), or else a hardware serial
console.
Choose the following parameters:
(a)
115200 Bd
(b)
8 Data bits
(c)
No parity
(d)
1 Stop Bit
Recommended Items
The following items are not absolutely necessary, but strongly recommended for
practical operation and development purposes:
■
SATA HDD/SSD and/or SD card as mass storage and/or boot media
■
Network connection to your local network
■
TFTP server available for downloading within the network
The TFTP server may run on the same PC as the serial terminal
