Quick Start Guide
3DM-GX3
®
-45 GPS-Aided Inertial Navigation System
Version
•
3DM-GX3
®
-45 firmware 1.5.22 and higher
•
3DM-GX3
®
Monitor 2 software 1.1.0.20 and higher
RS-232 Starter Kit
The 3DM-GX3
®
-45
RS-232 starter kit
contains:
•
3DM-GX3
®
-45 GPS-Aided Inertial Navigation System module
•
RS232-to-Micro-D communication and power cable
•
100-240 VAC Power Supply (9 VDC output) with 4 country adapters
•
GPS antenna
•
MMCX-to-SMA adapter
•
3DM-GX3
®
-45 software CD (Windows
®
XP, Vista, 7)
USB Starter Kit
The 3DM-GX3
®
-45
USB
starter kit
contains:
•
3DM-GX3
®
-45 GPS-Aided Inertial Navigation System module
•
USB-to-Micro-D communication and power cable
•
GPS antenna
•
MMCX-to-SMA adapter
•
3DM-GX3
®
-45 software CD (Windows
®
XP, Vista, 7)
Software Installation
•
Insert the 3DM-GX3
®
-45 software CD into the host computer's drive.
•
The CD menu will automatically launch. If it does not, navigate to the drive and double-
click
Auotrun.exe
.
•
Click the
Install 3DM-GX3 Monitor Software
button and follow the on-screen
instructions to complete the installation. You will receive a message indicating successful
installation and be asked to restart the system. Do not restart the system yet.
•
Click the
Install 3DM-GX3 Hard and Soft Iron Calibration Software
button and follow
the on-screen instructions to complete the installation. You will receive a message
indicating successful installation and be asked to restart the system. Do not restart the
system yet.
•
Click the
Install 3DM-GX3 Drivers
button and follow the on-screen instructions to
complete the installation.
•
Click the
Install 3DM-GX3 Manuals
button and follow the on-screen instructions to
complete the installation.
•
Restart the system.
1
