Interactive
Satellite
Terminal
Page
25
9.2. IDU Connection
Step 2
– Connect the Indoor Unit to a wall outlet through the
Power Adapter provided: AC/DC Adapter, +30V / 2A.
* Wait 5 minutes for the device to boot properly before making any other
connections.
Fig.21.
Setup / Installation Diagram using Wifi hotspot and Smartphone (Android & IOS)
** Apply power before connecting Ethernet. Connecting RJ45 before applying
power, or too soon after applying power, will result in a failure to get a solid
“link” and must start over.
Step 3
- Connect Wireless Access Point (WAP)
After waiting for the IDU to boot, c
onnect a wireless router to RJ45 “LAN” port
of Indoor Unit in bridge mode (Wireless WiFi Router is supplied by installer,
temporarily, to complete install.)
Wifi hotspot
Hotspot
Smart Phone
