Interactive
Satellite
Terminal
Page
13
6.2.2. Step 2: Mounting the antenna pole.
When mounting the antenna pole on the base, use a level to make sure the
antenna pole stands upright.
The antenna pole should be made of galvanized steel.
Mast pipe interface: between 1.25 inches and 2.36 inches.
(Antenna
’s pole diameter).
6.2.3. Step 3: Mounting the antenna.
Antenna arm comprises two parts, Part 1 and Part 2. One of them holds
the Outdoor unit, and the other one is screwed to the antenna dish. These
two parts are joined through a junction.
Rotate and screw the piece with the elevation scale. (1, B, E).
Tightening: 1.5 foot pounds.
Fig.4.
Antenna arm.
Identification
Description
Units
1
Arm (Part 1)
1
B
M8 x 16 mm round head, short neck
4
E
M8 Nut
4
