30
Maximum 4 bases can be linked to the same handset by the follow ways:
1. In standby mode, press
MENU
key, then using
ר
or
ש
key to select
REGISTERATION
item.
2. Press
MENU
key to enter. Press
ר
or
ש
key to select BASE from
BASE1
,
BASE2
,
BASE3
or
BASE 4
.
3. Press
MENU
key to confirm, LCD displays
PIN?
Then enter the pin code (defaulted as 0000, if input
wrong number, press
R/C
to delete).
4. When finished press
MENU
key to confirm. LCD display
SEARCHING
, then press and hold
key
until you has get
DI-DU- DU-
sound. The handset and base have registration successfully.
Notes:
1. If the handset and base is fail to registration successfully, the handset will return to the standby mode.
2. You can repeat the above steps to register another handset for the same base, and the successfully
registered handset will displays
HS2
or
HS3
on the LCD according to the registration sequence.
3. Press key to page the handset when difficult to look for.
OPERATION
Handset and hands-free mode
Press
key once to obtain a dial tone, dial your number, when you hear the called party answers the
phone, you can begin your conversation.
During the conversation, press
key to transfer the conversation mode between handset and hands-free.
Hands-free and handset volume control
During handset mode, press
ר
or
ש
key to adjust the handset volume. There are 5 levels for selection.
During hands-free mode, press
ר
or
ש
key to adjust the speaker volume. There are 6 levels for selection.
Mute the speakerphone
During a call, press
MENU
key once to mute the mouthpiece and
MUTE
will show on LCD. Press
MENU
key again to get back to the call and the
MUTE
will disappear.
Caller ID – type I & II
¾
TYPE I
After you have applied the caller ID service, you can see the caller phone number during an incoming ring.
¾
TYPE II
During the conversation, the phone number of the incoming call of the second caller can be seen in the unit.
This function can be worked when the user applied the Telecom service.
Auto timer
The timer will start automatically after 6s of the telephone line is engaged.
Flash
When dial a number and the line is busy, press
R/C
and
RD/P
key to dial it out again.
Pause
Press
RD/P
key will insert a time delay of 3.6 seconds in a dialing sequence.
Pre-dialing
The unit has pre-dialing function, when you may enter and edit the number before dial it out.
The following procedure describes how to use this function
:
Summary of Contents for TEL8021S
Page 1: ...TEL FONO INAL MBRICO 1 9 GHz Modelo TEL8021S...
Page 18: ...DECT PHONE 1 9 GHz Model TEL8021S...
Page 21: ...21 Key pad...
